×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you an
Engineering professional?
Join Engine-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Engine-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

A slight design change

A slight design change

A slight design change

(OP)
Meet Alice. She's had a facelift and a new wardrobe. I guess she needed to look pretty for her date with DHL.

2018:




2021:

RE: A slight design change

Why ever would one not want to put a weighty pod on the tip of a thin and apparently greatly flexible wing? And make it have a large gyroscopic component on top of that. Not sure which is the topper - the ever so racy choice of the V-tail or the tiny butt-prop.

I thought those design choices had been thoroughly exhausted in the 1930s Italian aircraft industry with echos going into that strange collection that Germans built for WWII.

In unrelated, but somehow similar news, Peter Sripol did a 30 foot span foam-board airplane with 50 electric motors and matching props across the wing leading edge, but lack of stiffness (and colliding with the launch vehicle) made flying itfor more than a few seconds to almost an entire half minute more interesting than it should be. https://www.youtube.com/watch?v=3aee2qDauTQ

RE: A slight design change

Sigh. Alice 2018 was likely designed by someone who had never certified an aircraft. When they got around to the one engine out case the configuration was doomed.

RE: A slight design change

How are wingtip-mounted motors better than the tail-mounted motors for an engine-out scenario?

RE: A slight design change

"Why ever would one not want to put a weighty pod on the tip of a thin and apparently greatly flexible wing?" ... never seen an F104, or a Learjet 31 ?

yes, I know something to be done carefully, but there are reasonable reasons for doing this (and for being very careful about doing it).

I find it "funny" that the original design supposedly took advantage of wing tip vortices, and was a new creative solution to a problem. Only to revised itself to a much more traditional design. To be sure, if we don't try new things we won't learn.

One issue they may have had is the weight a cables from battery (or whatever) to motor.

why to the engine nacelles have large inlets (where they had none before) ?

another day in paradise, or is paradise one day closer ?

RE: A slight design change

https://www.eviation.co/aircraft/#Alice

If we imagine that the fuselage aft of the wings is full of battery and power electronics then the CG change from empty to fully loaded looks pretty dramatic.

The horizontal stabilizer and elevator look small.

Quote (rb1957)

why to the engine nacelles have large inlets (where they had none before) ?
Because even electric motors need cooling.

RE: A slight design change

A logical placement for the batteries is under the cabin floor. Mind you the "terrible" energy density of batteries means either you don't go far, or you have blister like an A380 under floor !?

Another option might be H2 fuel (instead of batteries) ... but that of course brings a Whole bunch of different problems with it.

and where'd the windows go ? DHL wouldn't be interested in pax, so now maybe a freighter ?

another day in paradise, or is paradise one day closer ?

RE: A slight design change

The absence of windows is likely specific to DHL's application. Seems that this could be either a commuter or freight aircraft.

RE: A slight design change

The problem with doing anything with wing tip vortices is they are fundamental to the generation of lift - like inescapable. Anything clever one comes up with is just a patch that makes the flow look like it comes from a longer span - which is usually much cheaper to do unless, like large passenger/cargo jets the space at the airport is the thing limiting span.

Observe winglets - the greatest gift to stupid ground handling accidents ever. Watching one wing tip that would have passed over or under a wing or horizontal stabilizer instead slash its way to 10s of thousands in damage because the operator didn't want to pay a couple of ramp workers to keep an eye on clearance during pushback or taxi on the ramp tickles me in a way that only that famous truck-scalping bridge can approach.

RE: A slight design change

So what are those inlets on the engines for?
Demonstration of an ignorance of blockage factor maybe, they look way too big for engine cooling, and its a terrible place for a heat exchanger.

I suppose the tapered fuse doesn't matter if they are hand loading parcels or if the hold is a constant section and gap between the tapered skin and the hold is filled with battery's (not a completely silly idea).
Look at the waste space in that fuselage
https://www.eviation.co/wp-content/themes/eviation...

The payload difference between freight and passenger seems small (100 lbs) a bit of gillliner, carpet tape and a couple of cargo nets doesn't add up to much compared to 8 seats and interiors (plus the ducting and electrical plus the other passenger related bits and pieces).

Apparently pitching to Fedex with windows on your plane pictures is a big no no, guess the same might apply to DHL.

Quote (3ddave)

Observe winglets - the greatest gift to stupid ground handling accidents ever
nah everyone just needs to put their pitots on their wing tips (la F27) then ground handling issues just leave neat round holes in everything.

RE: A slight design change

Wingtip engines are NOT better for a one engine out condition.

RE: A slight design change

"Wingtip engines are NOT better for a one engine out condition."

did anyone think they were ?

whilst worst position for engine out there "could" be other redeeming factors that off-set this and make it a reasonable design solution.

another day in paradise, or is paradise one day closer ?

RE: A slight design change

Sorry, the renderings' quality made it look like the wingtip motors were the "new" design, and the OP didn't specify...

The new configuration looks a lot more conventional...which is not a derogatory term, people have looked at wing/tail/engine configurations for over a century now, and certain configurations just work better.

Though, a rotor strike on tail mounted fans might be an issue for takeoffs?

RE: A slight design change

the new location looks better for "prop ground strike" than the previous ...

though maybe they'd've added a ventral fin (a la Do335) ...

(edit) ... oh, I notice the "tail dragger" config ... the "prop ground strike" not so much of an issue with the earlier design ... maybe why they went this way ?

another day in paradise, or is paradise one day closer ?

RE: A slight design change

Same issue as the proposed Embraer regional airliner configuration in the other post... Is the cargo door next to the prop?

RE: A slight design change

(OP)
It seems that some have not followed the "Alice" from Eviation with quite the same point of view that I have, or not followed it at all. I don't blame you - it's always been a foolish paper-airplane right form the get-go and has yet to look like it has the potential to be a successful design. This post is perhaps another example of poking fun on the internet. If you see it that way, then no worries, ignore me. This is only meant for fun.

The 2018 model's tip-pod engines were hilarious. To see them actually built was amazing and raised the prospect of seeing video someday of a dramatic ground loop engine blow-up. Since that could have caused some fatalities, it was ironically fortunate for Eviation that instead they had a battery fire which destroyed their prototype.

The current concept is profoundly flawed, but less obviously so. The tail cone is sleek but extremely flexible, being so narrow. It once again demonstrates that the designers are artists, not bounded by engineering. There are other details that will be very difficult to master with the proportions they show, such as directional stability, one-engine out, landing speed, aeroelasticity of the wingtips and tail. Perhaps others I haven't yet noticed.

Striking any deal with DHL by showing them that concept is a new level of amazing.

RE: A slight design change

I was just struck by the thought, if that is the best of their airframe design, what on earth does the electrical system architecture look like?

RE: A slight design change

Yes, the few images I've seen look doubtful, but for GKN to be involved as a supplier of both major structural assy's and wiring harnesses, it does their reputation no favours if the project were to fail. For that reason I would hope that they have done their homework in assessing the project's viability and technical feasibility.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Engine-Tips Forums free from inappropriate posts.
The Engine-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Engine-Tips forums is a member-only feature.

Click Here to join Engine-Tips and talk with other members! Already a Member? Login


Resources

Low-Volume Rapid Injection Molding With 3D Printed Molds
Learn methods and guidelines for using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs and lead time. Discover how this hybrid manufacturing process enables on-demand mold fabrication to quickly produce small batches of thermoplastic parts. Download Now
Design for Additive Manufacturing (DfAM)
Examine how the principles of DfAM upend many of the long-standing rules around manufacturability - allowing engineers and designers to place a part’s function at the center of their design considerations. Download Now
Taking Control of Engineering Documents
This ebook covers tips for creating and managing workflows, security best practices and protection of intellectual property, Cloud vs. on-premise software solutions, CAD file management, compliance, and more. Download Now

Close Box

Join Engine-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Engine-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close