×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you an
Engineering professional?
Join Engine-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Engine-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

RAM Concept rebar mysteries

RAM Concept rebar mysteries

RAM Concept rebar mysteries

(OP)
Has anyone noticed shear rebar determined by RAM Concept can vary depending on whether the longitudinal rebar is Program or User defined? On a recent podium slab project, the program determined that 6 #7 bottom bars were needed for a particular beam and that the stirrups at the right end needed to be #5 (2-leg) @ 4.55 inches (10 spaces). When the 6 #7 bottom bars were changed to User defined with no other changes to the length or location, Concept then determined that the stirrups at the right end needed to be #5 (2-leg) @ 7.98 inches (6 spaces). In both cases Concept showed that the shear at the right end of the beam is 184 kips. Manual calculations showed that the 7.98 inch spacing was correct. The attached file shows screen pictures of this odd behavior. Why Concept showed the 4.55 inch spacing when the program designed the bottom bars is a mystery.

Concept has also on occasion shown another odd behavior. After changing longitudinal rebar from Program to User defined, Concept sometimes then shows that more longitudinal rebar is needed. After deleting the rebar that had been changed to User defined and letting Concept once again design the rebar, it again shows the original lesser amount is required.

This behavior is not confidence building.

RE: RAM Concept rebar mysteries


If you are not using the latest version 8.2, updating is a good idea.
If you want to send me your model I can also check it in the latest version.
Sometimes when you freeze one set of rebar (top or bottom) it will impact the rebar designed on the opposite face, and that might affect the final d value used thus impacting the shear bar spacing. See also: https://communities.bentley.com/products/ram-staad...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Engine-Tips Forums free from inappropriate posts.
The Engine-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Engine-Tips forums is a member-only feature.

Click Here to join Engine-Tips and talk with other members! Already a Member? Login


Resources

Low-Volume Rapid Injection Molding With 3D Printed Molds
Learn methods and guidelines for using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs and lead time. Discover how this hybrid manufacturing process enables on-demand mold fabrication to quickly produce small batches of thermoplastic parts. Download Now
Design for Additive Manufacturing (DfAM)
Examine how the principles of DfAM upend many of the long-standing rules around manufacturability - allowing engineers and designers to place a part’s function at the center of their design considerations. Download Now
Taking Control of Engineering Documents
This ebook covers tips for creating and managing workflows, security best practices and protection of intellectual property, Cloud vs. on-premise software solutions, CAD file management, compliance, and more. Download Now

Close Box

Join Engine-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Engine-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close