×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Engine-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Engine-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Metrology

Metrology

Metrology

(OP)
Hi All,
In metrology, we are working on small plastic parts, and sometimes it needs cutting to reach the wanted dimension, right now we are using a cutting disc, it's dangerous and it may deform the parts, is there any advanced tools, that can guaranty the security, and preserve parts from deformation.
Thank you for your help.

RE: Metrology

How often is "sometimes?" I have issue with metrology doing rework for production, in addition to the simple fact that yield should be designed-in, not reworked in. If the manufacturing tolerances are bad, the design should accommodate that, or find new manufacturing process.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! https://www.youtube.com/watch?v=BKorP55Aqvg
FAQ731-376: Engine-Tips.com Forum Policies forum1529: Translation Assistance for Engineers Entire Forum list http://engine-tips.com/forumlist.cfm

RE: Metrology

The dimension is there for a functional reason (I hope) therefore create a rig that measures that function rather than trying to measure something directly.

For example suppose you had an oil lubrication channel in a casting. You could cut castings open and measure the dimension of the channel. or you could put a certain flow rate of fluid through it and measure the pressure loss.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376: Engine-Tips.com Forum Policies http://engine-tips.com/market.cfm?

RE: Metrology

I have on occasion had to cut open (and destroy) assemblies in order to verify what was potted in, or even just to verify a dimension that no gage could reach.

I found that an ordinary hand hacksaw, fitted with a Grit-Edge blade, can do a nice job of basically making a metallurgical section. Fine grit round section blades can even section a potted optical assembly right through the lens.

Mike Halloran
Corinth, NY, USA

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Engine-Tips Forums free from inappropriate posts.
The Engine-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Engine-Tips forums is a member-only feature.

Click Here to join Engine-Tips and talk with other members! Already a Member? Login


Resources

Engineering as It Should Be - Chapter 2: Document Security
This ebook covers basic tips for creating and managing workflows, security best practices and protection of intellectual property, Cloud vs. on-premise software solutions, CAD file management, compliance, and more. Chapter 2 covers cybersecurity and answers the question: How do you secure your files and documents? Download Now

Close Box

Join Engine-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Engine-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close